source: Initial setup
This commit is contained in:
RedHawk
348
source/test/src/cr_startup_lpc11u6x.cpp
Normal file
348
source/test/src/cr_startup_lpc11u6x.cpp
Normal file
@@ -0,0 +1,348 @@
|
||||
//*****************************************************************************
|
||||
// LPC11U6x Microcontroller Startup code for use with LPCXpresso IDE
|
||||
//
|
||||
// Version : 150706
|
||||
//*****************************************************************************
|
||||
//
|
||||
// Copyright(C) NXP Semiconductors, 2014-2015, 2020
|
||||
// All rights reserved.
|
||||
//
|
||||
// NXP Confidential. This software is owned or controlled by NXP and may only be
|
||||
// used strictly in accordance with the applicable license terms.
|
||||
//
|
||||
// By expressly accepting such terms or by downloading, installing, activating
|
||||
// and/or otherwise using the software, you are agreeing that you have read, and
|
||||
// that you agree to comply with and are bound by, such license terms.
|
||||
//
|
||||
// If you do not agree to be bound by the applicable license terms, then you may not
|
||||
// retain, install, activate or otherwise use the software.
|
||||
//*****************************************************************************
|
||||
|
||||
#if defined (__cplusplus)
|
||||
#ifdef __REDLIB__
|
||||
#error Redlib does not support C++
|
||||
#else
|
||||
//*****************************************************************************
|
||||
//
|
||||
// The entry point for the C++ library startup
|
||||
//
|
||||
//*****************************************************************************
|
||||
extern "C" {
|
||||
extern void __libc_init_array(void);
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define WEAK __attribute__ ((weak))
|
||||
#define ALIAS(f) __attribute__ ((weak, alias (#f)))
|
||||
|
||||
//*****************************************************************************
|
||||
#if defined (__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
//*****************************************************************************
|
||||
#if defined (__USE_CMSIS) || defined (__USE_LPCOPEN)
|
||||
// Declaration of external SystemInit function
|
||||
extern void SystemInit(void);
|
||||
#endif
|
||||
|
||||
// Patch the AEABI integer divide functions to use MCU's romdivide library
|
||||
#ifdef __USE_ROMDIVIDE
|
||||
// Location in memory that holds the address of the ROM Driver table
|
||||
#define PTR_ROM_DRIVER_TABLE ((unsigned int *)(0x1FFF1FF8))
|
||||
// Variables to store addresses of idiv and udiv functions within MCU ROM
|
||||
unsigned int *pDivRom_idiv;
|
||||
unsigned int *pDivRom_uidiv;
|
||||
#endif
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
// Forward declaration of the default handlers. These are aliased.
|
||||
// When the application defines a handler (with the same name), this will
|
||||
// automatically take precedence over these weak definitions
|
||||
//
|
||||
//*****************************************************************************
|
||||
void ResetISR(void);
|
||||
WEAK void NMI_Handler(void);
|
||||
WEAK void HardFault_Handler(void);
|
||||
WEAK void SVC_Handler(void);
|
||||
WEAK void PendSV_Handler(void);
|
||||
WEAK void SysTick_Handler(void);
|
||||
WEAK void IntDefaultHandler(void);
|
||||
//*****************************************************************************
|
||||
//
|
||||
// Forward declaration of the specific IRQ handlers. These are aliased
|
||||
// to the IntDefaultHandler, which is a 'forever' loop. When the application
|
||||
// defines a handler (with the same name), this will automatically take
|
||||
// precedence over these weak definitions
|
||||
//
|
||||
//*****************************************************************************
|
||||
void PIN_INT0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void PIN_INT1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void PIN_INT2_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void PIN_INT3_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void PIN_INT4_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void PIN_INT5_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void PIN_INT6_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void PIN_INT7_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void GINT0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void GINT1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void I2C1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void USART1_4_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void USART2_3_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void SCT0_1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void SSP1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void I2C0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void TIMER16_0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void TIMER16_1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void TIMER32_0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void TIMER32_1_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void SSP0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void USART0_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void USB_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void USB_FIQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void ADCA_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void RTC_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void BOD_WDT_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void FMC_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void DMA_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void ADCB_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
void USBWakeup_IRQHandler (void) ALIAS(IntDefaultHandler);
|
||||
|
||||
//*****************************************************************************
|
||||
// The entry point for the application.
|
||||
// __main() is the entry point for redlib based applications
|
||||
// main() is the entry point for newlib based applications
|
||||
//*****************************************************************************
|
||||
#if defined (__REDLIB__)
|
||||
extern void __main(void);
|
||||
#endif
|
||||
extern int main(void);
|
||||
//*****************************************************************************
|
||||
//
|
||||
// External declaration for the pointer to the stack top from the Linker Script
|
||||
//
|
||||
//*****************************************************************************
|
||||
extern void _vStackTop(void);
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
// External declaration for LPC MCU vector table checksum from Linker Script
|
||||
//
|
||||
//*****************************************************************************
|
||||
WEAK extern void __valid_user_code_checksum();
|
||||
|
||||
//*****************************************************************************
|
||||
#if defined (__cplusplus)
|
||||
} // extern "C"
|
||||
#endif
|
||||
//*****************************************************************************
|
||||
//
|
||||
// The vector table. Note that the proper constructs must be placed on this to
|
||||
// ensure that it ends up at physical address 0x0000.0000.
|
||||
//
|
||||
//*****************************************************************************
|
||||
extern void (* const g_pfnVectors[])(void);
|
||||
__attribute__ ((used,section(".isr_vector")))
|
||||
void (* const g_pfnVectors[])(void) = {
|
||||
&_vStackTop, // The initial stack pointer
|
||||
ResetISR, // The reset handler
|
||||
NMI_Handler, // The NMI handler
|
||||
HardFault_Handler, // The hard fault handler
|
||||
0, // Reserved
|
||||
0, // Reserved
|
||||
0, // Reserved
|
||||
__valid_user_code_checksum, // LPC MCU Checksum
|
||||
0, // Reserved
|
||||
0, // Reserved
|
||||
0, // Reserved
|
||||
SVC_Handler, // SVCall handler
|
||||
0, // Reserved
|
||||
0, // Reserved
|
||||
PendSV_Handler, // The PendSV handler
|
||||
SysTick_Handler, // The SysTick handler
|
||||
|
||||
// LPC11U6x specific handlers
|
||||
PIN_INT0_IRQHandler, // 0 - GPIO pin interrupt 0
|
||||
PIN_INT1_IRQHandler, // 1 - GPIO pin interrupt 1
|
||||
PIN_INT2_IRQHandler, // 2 - GPIO pin interrupt 2
|
||||
PIN_INT3_IRQHandler, // 3 - GPIO pin interrupt 3
|
||||
PIN_INT4_IRQHandler, // 4 - GPIO pin interrupt 4
|
||||
PIN_INT5_IRQHandler, // 5 - GPIO pin interrupt 5
|
||||
PIN_INT6_IRQHandler, // 6 - GPIO pin interrupt 6
|
||||
PIN_INT7_IRQHandler, // 7 - GPIO pin interrupt 7
|
||||
GINT0_IRQHandler, // 8 - GPIO GROUP0 interrupt
|
||||
GINT1_IRQHandler, // 9 - GPIO GROUP1 interrupt
|
||||
I2C1_IRQHandler, // 10 - I2C1
|
||||
USART1_4_IRQHandler, // 11 - combined USART1 & 4 interrupt
|
||||
USART2_3_IRQHandler, // 12 - combined USART2 & 3 interrupt
|
||||
SCT0_1_IRQHandler, // 13 - combined SCT0 and 1 interrupt
|
||||
SSP1_IRQHandler, // 14 - SPI/SSP1 Interrupt
|
||||
I2C0_IRQHandler, // 15 - I2C0
|
||||
TIMER16_0_IRQHandler, // 16 - CT16B0 (16-bit Timer 0)
|
||||
TIMER16_1_IRQHandler, // 17 - CT16B1 (16-bit Timer 1)
|
||||
TIMER32_0_IRQHandler, // 18 - CT32B0 (32-bit Timer 0)
|
||||
TIMER32_1_IRQHandler, // 19 - CT32B1 (32-bit Timer 1)
|
||||
SSP0_IRQHandler, // 20 - SPI/SSP0 Interrupt
|
||||
USART0_IRQHandler, // 21 - USART0
|
||||
USB_IRQHandler, // 22 - USB IRQ
|
||||
USB_FIQHandler, // 23 - USB FIQ
|
||||
ADCA_IRQHandler, // 24 - ADC A(A/D Converter)
|
||||
RTC_IRQHandler, // 25 - Real Time CLock interrpt
|
||||
BOD_WDT_IRQHandler, // 25 - Combined Brownout/Watchdog interrupt
|
||||
FMC_IRQHandler, // 27 - IP2111 Flash Memory Controller
|
||||
DMA_IRQHandler, // 28 - DMA interrupt
|
||||
ADCB_IRQHandler, // 24 - ADC B (A/D Converter)
|
||||
USBWakeup_IRQHandler, // 30 - USB wake-up interrupt
|
||||
0, // 31 - Reserved
|
||||
};
|
||||
|
||||
//*****************************************************************************
|
||||
// Functions to carry out the initialization of RW and BSS data sections. These
|
||||
// are written as separate functions rather than being inlined within the
|
||||
// ResetISR() function in order to cope with MCUs with multiple banks of
|
||||
// memory.
|
||||
//*****************************************************************************
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void data_init(unsigned int romstart, unsigned int start, unsigned int len) {
|
||||
unsigned int *pulDest = (unsigned int*) start;
|
||||
unsigned int *pulSrc = (unsigned int*) romstart;
|
||||
unsigned int loop;
|
||||
for (loop = 0; loop < len; loop = loop + 4)
|
||||
*pulDest++ = *pulSrc++;
|
||||
}
|
||||
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void bss_init(unsigned int start, unsigned int len) {
|
||||
unsigned int *pulDest = (unsigned int*) start;
|
||||
unsigned int loop;
|
||||
for (loop = 0; loop < len; loop = loop + 4)
|
||||
*pulDest++ = 0;
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
// The following symbols are constructs generated by the linker, indicating
|
||||
// the location of various points in the "Global Section Table". This table is
|
||||
// created by the linker via the Code Red managed linker script mechanism. It
|
||||
// contains the load address, execution address and length of each RW data
|
||||
// section and the execution and length of each BSS (zero initialized) section.
|
||||
//*****************************************************************************
|
||||
extern unsigned int __data_section_table;
|
||||
extern unsigned int __data_section_table_end;
|
||||
extern unsigned int __bss_section_table;
|
||||
extern unsigned int __bss_section_table_end;
|
||||
|
||||
//*****************************************************************************
|
||||
// Reset entry point for your code.
|
||||
// Sets up a simple runtime environment and initializes the C/C++
|
||||
// library.
|
||||
//*****************************************************************************
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void
|
||||
ResetISR(void) {
|
||||
|
||||
// Optionally enable RAM banks that may be off by default at reset
|
||||
#if !defined (DONT_ENABLE_DISABLED_RAMBANKS)
|
||||
volatile unsigned int *SYSCON_SYSAHBCLKCTRL = (unsigned int *) 0x40048080;
|
||||
// Ensure that RAM1(26) and USBSRAM(27) bits in SYSAHBCLKCTRL are set
|
||||
*SYSCON_SYSAHBCLKCTRL |= (1 << 26) | (1 <<27);
|
||||
#endif
|
||||
|
||||
//
|
||||
// Copy the data sections from flash to SRAM.
|
||||
//
|
||||
unsigned int LoadAddr, ExeAddr, SectionLen;
|
||||
unsigned int *SectionTableAddr;
|
||||
|
||||
// Load base address of Global Section Table
|
||||
SectionTableAddr = &__data_section_table;
|
||||
|
||||
// Copy the data sections from flash to SRAM.
|
||||
while (SectionTableAddr < &__data_section_table_end) {
|
||||
LoadAddr = *SectionTableAddr++;
|
||||
ExeAddr = *SectionTableAddr++;
|
||||
SectionLen = *SectionTableAddr++;
|
||||
data_init(LoadAddr, ExeAddr, SectionLen);
|
||||
}
|
||||
// At this point, SectionTableAddr = &__bss_section_table;
|
||||
// Zero fill the bss segment
|
||||
while (SectionTableAddr < &__bss_section_table_end) {
|
||||
ExeAddr = *SectionTableAddr++;
|
||||
SectionLen = *SectionTableAddr++;
|
||||
bss_init(ExeAddr, SectionLen);
|
||||
}
|
||||
|
||||
// Patch the AEABI integer divide functions to use MCU's romdivide library
|
||||
#ifdef __USE_ROMDIVIDE
|
||||
// Get address of Integer division routines function table in ROM
|
||||
unsigned int *div_ptr = (unsigned int *)((unsigned int *)*(PTR_ROM_DRIVER_TABLE))[4];
|
||||
// Get addresses of integer divide routines in ROM
|
||||
// These address are then used by the code in aeabi_romdiv_patch.s
|
||||
pDivRom_idiv = (unsigned int *)div_ptr[0];
|
||||
pDivRom_uidiv = (unsigned int *)div_ptr[1];
|
||||
#endif
|
||||
|
||||
#if defined (__USE_CMSIS) || defined (__USE_LPCOPEN)
|
||||
SystemInit();
|
||||
#endif
|
||||
|
||||
#if defined (__cplusplus)
|
||||
//
|
||||
// Call C++ library initialisation
|
||||
//
|
||||
__libc_init_array();
|
||||
#endif
|
||||
|
||||
#if defined (__REDLIB__)
|
||||
// Call the Redlib library, which in turn calls main()
|
||||
__main() ;
|
||||
#else
|
||||
main();
|
||||
#endif
|
||||
//
|
||||
// main() shouldn't return, but if it does, we'll just enter an infinite loop
|
||||
//
|
||||
while (1) {
|
||||
;
|
||||
}
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
// Default exception handlers. Override the ones here by defining your own
|
||||
// handler routines in your application code.
|
||||
//*****************************************************************************
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void NMI_Handler(void)
|
||||
{ while(1) { }
|
||||
}
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void HardFault_Handler(void)
|
||||
{ while(1) { }
|
||||
}
|
||||
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void SVC_Handler(void)
|
||||
{ while(1) { }
|
||||
}
|
||||
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void PendSV_Handler(void)
|
||||
{ while(1) { }
|
||||
}
|
||||
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void SysTick_Handler(void)
|
||||
{ while(1) { }
|
||||
}
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
// Processor ends up here if an unexpected interrupt occurs or a specific
|
||||
// handler is not present in the application code.
|
||||
//
|
||||
//*****************************************************************************
|
||||
__attribute__ ((section(".after_vectors")))
|
||||
void IntDefaultHandler(void)
|
||||
{ while(1) { }
|
||||
}
|
||||
Reference in New Issue
Block a user