Add serial & UART classes for Modbus use

Modbus/src/SerialPort.cpp

@@ -0,0 +1,50 @@
+#include "SerialPort.h"
+
+
+
+SerialPort::SerialPort() {
+	if(!u) {
+		LpcPinMap none = {-1, -1}; // unused pin has negative values in it
+		LpcPinMap txpin = { 0, 28 }; // transmit pin that goes to rs485 driver chip
+		LpcPinMap rxpin = { 0, 24 }; // receive pin that goes to rs485 driver chip
+		LpcPinMap rtspin = { 1, 0 }; // handshake pin that is used to set tranmitter direction
+		LpcUartConfig cfg = { LPC_USART1, 9600, UART_CFG_DATALEN_8 | UART_CFG_PARITY_NONE | UART_CFG_STOPLEN_2, true, txpin, rxpin, rtspin, none };
+		u = new LpcUart(cfg);
+	}
+}
+
+LpcUart *SerialPort::u = nullptr;
+
+SerialPort::~SerialPort() {
+	/* DeInitialize UART peripheral */
+	delete u;
+}
+
+int SerialPort::available() {
+	return u->peek();
+}
+
+void SerialPort::begin(int speed) {
+	u->speed(speed);
+
+}
+
+int SerialPort::read() {
+	char byte;
+	if(u->read(byte)> 0) return (byte);
+	return -1;
+}
+int SerialPort::write(const char* buf, int len) {
+	return u->write(buf, len);
+}
+
+int SerialPort::print(int val, int format) {
+	// here only to maintain compatibility with Arduino interface
+	(void) val;
+	(void) format;
+	return (0);
+}
+
+void SerialPort::flush() {
+	while(!u->txempty()) __WFI();
+}

Modbus/src/Uart.cpp

@@ -0,0 +1,227 @@
+#include <cstring>
+#include "Uart.h"
+
+
+static LpcUart *u0;
+static LpcUart *u1;
+static LpcUart *u2;
+
+extern "C" {
+/**
+ * @brief	UART interrupt handler using ring buffers
+ * @return	Nothing
+ */
+void UART0_IRQHandler(void)
+{
+	/* Want to handle any errors? Do it here. */
+
+	/* Use default ring buffer handler. Override this with your own
+	   code if you need more capability. */
+	if(u0) u0->isr();
+}
+
+void UART1_IRQHandler(void)
+{
+	/* Want to handle any errors? Do it here. */
+
+	/* Use default ring buffer handler. Override this with your own
+	   code if you need more capability. */
+	if(u1) u1->isr();
+}
+
+void UART2_IRQHandler(void)
+{
+	/* Want to handle any errors? Do it here. */
+
+	/* Use default ring buffer handler. Override this with your own
+	   code if you need more capability. */
+	if(u2) u2->isr();
+}
+
+}
+
+
+void LpcUart::isr() {
+	Chip_UART_IRQRBHandler(uart, &rxring, &txring);
+}
+
+bool LpcUart::init = false;
+
+LpcUart::LpcUart(const LpcUartConfig &cfg) {
+	CHIP_SWM_PIN_MOVABLE_T tx;
+	CHIP_SWM_PIN_MOVABLE_T rx;
+	CHIP_SWM_PIN_MOVABLE_T cts;
+	CHIP_SWM_PIN_MOVABLE_T rts;
+	bool use_rts = (cfg.rts.port >= 0);
+	bool use_cts = (cfg.cts.port >= 0);
+
+	if(!init) {
+		init = true;
+		/* Before setting up the UART, the global UART clock for USARTS 1-4
+		 * must first be setup. This requires setting the UART divider and
+		 * the UART base clock rate to 16x the maximum UART rate for all
+		 * UARTs.
+		 * */
+		/* Use main clock rate as base for UART baud rate divider */
+		Chip_Clock_SetUARTBaseClockRate(Chip_Clock_GetMainClockRate(), false);
+	}
+
+	uart = nullptr; // set default value before checking which UART to configure
+
+	if(cfg.pUART == LPC_USART0) {
+		if(u0) return; // already exists
+		else u0 = this;
+		tx = SWM_UART0_TXD_O;
+		rx = SWM_UART0_RXD_I;
+		rts = SWM_UART0_RTS_O;
+		cts = SWM_UART0_CTS_I;
+		irqn = UART0_IRQn;
+	}
+	else if(cfg.pUART == LPC_USART1) {
+		if(u1) return; // already exists
+		else u1 = this;
+		tx = SWM_UART1_TXD_O;
+		rx = SWM_UART1_RXD_I;
+		rts = SWM_UART1_RTS_O;
+		cts = SWM_UART1_CTS_I;
+		irqn = UART1_IRQn;
+	}
+	else if(cfg.pUART == LPC_USART2) {
+		if(u2) return; // already exists
+		else u2 = this;
+		tx = SWM_UART2_TXD_O;
+		rx = SWM_UART2_RXD_I;
+		use_rts = false; // UART2 does not support handshakes
+		use_cts = false;
+		irqn = UART2_IRQn;
+	}
+	else {
+		return;
+	}
+
+	uart = cfg.pUART; // set the actual value after validity checking
+
+
+	if(cfg.tx.port >= 0) {
+		Chip_IOCON_PinMuxSet(LPC_IOCON, cfg.tx.port, cfg.tx.pin, (IOCON_MODE_INACT | IOCON_DIGMODE_EN));
+		Chip_SWM_MovablePortPinAssign(tx, cfg.tx.port, cfg.tx.pin);
+	}
+
+	if(cfg.rx.port >= 0) {
+		Chip_IOCON_PinMuxSet(LPC_IOCON, cfg.rx.port, cfg.rx.pin, (IOCON_MODE_INACT | IOCON_DIGMODE_EN));
+		Chip_SWM_MovablePortPinAssign(rx, cfg.rx.port, cfg.rx.pin);
+	}
+
+	if(use_cts) {
+		Chip_IOCON_PinMuxSet(LPC_IOCON, cfg.cts.port, cfg.cts.pin, (IOCON_MODE_INACT | IOCON_DIGMODE_EN));
+		Chip_SWM_MovablePortPinAssign(cts, cfg.cts.port, cfg.cts.pin);
+	}
+
+	if(use_rts) {
+		Chip_IOCON_PinMuxSet(LPC_IOCON, cfg.rts.port, cfg.rts.pin, (IOCON_MODE_INACT | IOCON_DIGMODE_EN));
+		Chip_SWM_MovablePortPinAssign(rts, cfg.rts.port, cfg.rts.pin);
+	}
+
+
+	/* Setup UART */
+	Chip_UART_Init(uart);
+	Chip_UART_ConfigData(uart, cfg.data);
+	Chip_UART_SetBaud(uart, cfg.speed);
+
+	if(use_rts && cfg.rs485) {
+		uart->CFG |= (1 << 20); // enable rs485 mode
+		//uart->CFG |= (1 << 18); // OE turnaraound time
+		uart->CFG |= (1 << 21);// driver enable polarity (active high)
+	}
+
+	Chip_UART_Enable(uart);
+	Chip_UART_TXEnable(uart);
+
+	/* Before using the ring buffers, initialize them using the ring
+	   buffer init function */
+	RingBuffer_Init(&rxring, rxbuff, 1, UART_RB_SIZE);
+	RingBuffer_Init(&txring, txbuff, 1, UART_RB_SIZE);
+
+
+	/* Enable receive data and line status interrupt */
+	Chip_UART_IntEnable(uart, UART_INTEN_RXRDY);
+	Chip_UART_IntDisable(uart, UART_INTEN_TXRDY);	/* May not be needed */
+
+	/* Enable UART interrupt */
+	NVIC_EnableIRQ(irqn);
+}
+
+LpcUart::~LpcUart() {
+	if(uart != nullptr) {
+		NVIC_DisableIRQ(irqn);
+		Chip_UART_IntDisable(uart, UART_INTEN_RXRDY);
+		Chip_UART_IntDisable(uart, UART_INTEN_TXRDY);
+
+		if(uart == LPC_USART0) {
+			u0 = nullptr;
+		}
+		else if(uart == LPC_USART1) {
+			u1 = nullptr;
+		}
+		else if(uart == LPC_USART2) {
+			u2 = nullptr;
+		}
+	}
+}
+
+
+int  LpcUart::free()
+{
+	return RingBuffer_GetCount(&txring);;
+}
+
+int  LpcUart::peek()
+{
+	return RingBuffer_GetCount(&rxring);
+}
+
+int  LpcUart::read(char &c)
+{
+	return Chip_UART_ReadRB(uart, &rxring, &c, 1);
+}
+
+int  LpcUart::read(char *buffer, int len)
+{
+	return Chip_UART_ReadRB(uart, &rxring, buffer, len);
+}
+
+int LpcUart::write(char c)
+{
+	return Chip_UART_SendRB(uart, &txring, &c, 1);
+}
+
+int LpcUart::write(const char *s)
+{
+	return Chip_UART_SendRB(uart, &txring, s, strlen(s));
+}
+
+int LpcUart::write(const char *buffer, int len)
+{
+	return Chip_UART_SendRB(uart, &txring, buffer, len);
+}
+
+void LpcUart::txbreak(bool brk)
+{
+	// break handling not implemented yeet
+}
+
+bool LpcUart::rxbreak()
+{
+	// break handling not implemented yeet
+	return false;
+}
+
+void LpcUart::speed(int bps)
+{
+	Chip_UART_SetBaud(uart, bps);
+}
+
+bool LpcUart::txempty()
+{
+	return (RingBuffer_GetCount(&txring) == 0);
+}